Upstream / Downstream

pathwayImage

Explore pathways related to this product.

Antibody Guarantee

CST Antibody Performance Guarantee

LEARN MORE  

To get local purchase information on this product, click here

Questions?

Find answers on our FAQs page.

ANSWERS  

Visit PhosphoSitePlus®

PTM information and tools available.

LEARN MORE

REACTIVITY
H M R Mk
Page

ELISA Antibody Pair

A. Solutions and Reagents

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. 20X Phosphate Buffered Saline (PBS): (#9808) To prepare 1 L 1X PBS: add 50 ml 20X PBS to 950 ml dH2O, mix.
  2. Wash Buffer: 1X PBS/0.05% Tween® 20, (20X PBST #9809).
  3. Blocking Buffer: 1X PBS/0.05% Tween® 20, 1% BSA.
  4. 1X Cell Lysis Buffer: 10X Cell Lysis Buffer (#9803): To prepare 10 ml of 1X Cell Lysis Buffer, add 1 ml of 10X Cell Lysis Buffer to 9 ml of dH2O, mix. Buffer can be stored at 4°C for short-term use (1–2 weeks).

    Recommended: Add 1 mM phenylmethylsulfonyl fluoride (PMSF) (#8553) immediately before use.

  5. Bovine Serum Albumin (BSA): (#9998).
  6. TMB Substrate: (#7004).
  7. STOP Solution: (#7002)

    NOTE: Reagents should be made fresh daily.

B. Preparing Cell Lysates

For adherent cells

  1. Aspirate media when the culture reaches 80–90% confluence. Treat cells by adding fresh media containing regulator for desired time.
  2. Remove media and rinse cells once with ice-cold 1X PBS.
  3. Remove PBS and add 0.5 ml ice-cold 1X Cell Lysis Buffer plus 1 mM PMSF to each plate (10 cm diameter) and incubate the plate on ice for 5 min.
  4. Scrape cells off the plate and transfer to an appropriate tube. Keep on ice.
  5. Sonicate lysates on ice.
  6. Microcentrifuge for 10 min (x14,000 rpm) at 4°C and transfer the supernatant to a new tube. The supernatant is the cell lysate. Store at -80°C in single-use aliquots.

For suspension cells

  1. Remove media by low speed centrifugation (~1,200 rpm) when the culture reaches 0.5–1.0 x 106 viable cells/ml. Treat cells by adding fresh media containing regulator for desired time.
  2. Collect cells by low speed centrifugation (~1,200 rpm) and wash once with 5–10 ml ice-cold 1X PBS.
  3. Cells harvested from 50 ml of growth media can be lysed in 2.0 ml of 1X cell lysis buffer plus 1 mM PMSF.
  4. Sonicate lysates on ice.
  5. Microcentrifuge for 10 min (x14,000 rpm) at 4°C and transfer the supernatant to a new tube. The supernatant is the cell lysate. Store at -80°C in single-use aliquots.

C. Coating Procedure

  1. Rinse microplate with 200 µl of dH2O, discard liquid. Blot on paper towel to make sure wells are dry.
  2. Dilute capture antibody 1:100 in 1X PBS. For a single 96 well plate, add 100 µl of capture antibody stock to 9.9 ml 1X PBS. Mix well and add 100 µl/well. Cover plate and incubate overnight at 4°C (17–20 hr).
  3. After overnight coating, gently uncover plate and wash wells:
    1. Discard plate contents into a receptacle.
    2. Wash four times with wash buffer, 200 µl each time per well. For each wash, strike plates on fresh paper towels hard enough to remove the residual solution in each well, but do not allow wells to completely dry at any time.
    3. Clean the underside of all wells with a lint-free tissue.
  4. Block plates. Add 150 µl of blocking buffer/well, cover plate, and incubate at 37°C for 2 hr.
  5. After blocking, wash plate (Section C, Step 3). Plate is ready to use.

D. Test Procedure

  1. Lysates can be used undiluted or diluted in blocking buffer. 100 µl of lysate is added per well. Cover plate and incubate at 37°C for 2 hr.
  2. Wash plate (Section C, Step 3).
  3. Dilute detection antibody 1:100 in blocking buffer. For a single 96 well plate, add 100 µl of detection antibody Stock to 9.9 ml of blocking buffer. Mix well and add 100 µl/well. Cover plate and incubate at 37°C for 1 hr.
  4. Wash plate (Section C, Step 3).
  5. Secondary antibody, either streptavidin anti-mouse or anti-rabbit-HRP, is diluted 1:1000 in blocking buffer. For a single 96 well plate, add 10 µl of secondary antibody stock to 9.99 ml of blocking buffer. Mix well and add 100 µl/well. Cover and incubate at 37°C for 30 min.
  6. Wash plate (Section C, Step 3).
  7. Add 100 µl of TMB substrate per well. Cover and incubate at 37°C for 10 min.
  8. Add 100 µl of STOP solution per well. Shake gently for a few seconds.
  9. Read plate on a microplate reader at absorbance 450 nm.
    1. Visual Determination: Read within 30 min after adding STOP solution.
    2. Spectrophotometric Determination: Wipe underside of wells with a lint-free tissue. Read absorbance at 450 nm within 30 min after adding STOP solution.

posted January 2008

revised Sepetember 2013

protocol id: 20

Product Includes Volume Cap Color
4E-BP1 (T37/46) Capture Ab (100X) 0.4 ml Pink
4E-BP1 Detection Ab (100X) 0.4 ml Blue
Anti-rabbit IgG, HRP-linked Antibody 0.04 ml Yellow

Product Description

CST's PathScan® Phospho-4E-BP1 (Thr37/Thr46) Sandwich ELISA Antibody Pair is offered as an economical alternative to our PathScan® Phospho-4E-BP1 (Thr37/Thr46) Sandwich ELISA Kit #7216. Capture and Detection antibodies (100X stocks) and HRP-conjugated secondary antibody (1000X stock) are supplied. Sufficient reagents are supplied for 4 x 96 well ELISAs. The Phospho-4E-BP1 (Thr37/Thr46) Capture Antibody is coated in PBS overnight in a 96 well microplate. After blocking, cell lysates are added followed by a 4E-BP1 Detection Antibody and anti-Mouse IgG, HRP conjugated antibody. HRP substrate, TMB, is added for color development. The magnitude of the absorbance for this developed color is proportional to the quantity of Phospho-4E-BP1 (Thr37/Thr46) protein.

Antibodies in kit are custom formulations specific to kit.


Product Usage Information

Storage: Capture and detection antibodies are stored at 4°C. HRP-linked secondary reagent is stored at -20°C.

Specificity / Sensitivity

For Antibody Pair specificity and sensitivity, please refer to the corresponding PathScan® Sandwich ELISA Kit. Note: This antibody pair detects proteins from the indicated species, as determined through in-house testing, but may also detect homologous proteins from other species.


Species Reactivity: Human, Mouse, Rat, Monkey

Translation repressor protein 4E-BP1 (also known as PHAS-1) inhibits cap-dependent translation by binding to the translation initiation factor eIF4E. Hyperphosphorylation of 4E-BP1 disrupts this interaction and results in activation of cap-dependent translation (1). Both the PI3 kinase/Akt pathway and FRAP/mTOR kinase regulate 4E-BP1 activity (2,3). Multiple 4E-BP1 residues are phosphorylated in vivo (4). While phosphorylation by FRAP/mTOR at Thr37 and Thr46 does not prevent the binding of 4E-BP1 to eIF4E, it is thought to prime 4E-BP1 for subsequent phosphorylation at Ser65 and Thr70 (5).


1.  Pause, A. et al. (1994) Nature 371, 762-7.

2.  Brunn, G.J. et al. (1997) Science 277, 99-101.

3.  Gingras, A.C. et al. (1998) Genes Dev 12, 502-13.

4.  Fadden, P. et al. (1997) J Biol Chem 272, 10240-7.

5.  Gingras, A.C. et al. (1999) Genes Dev 13, 1422-37.


Entrez-Gene Id 1978
Swiss-Prot Acc. Q13541


For Research Use Only. Not For Use In Diagnostic Procedures.
Cell Signaling Technology® is a trademark of Cell Signaling Technology, Inc.
PathScan® is a trademark of Cell Signaling Technology, Inc.