Dropping with the temps: Cool deals on CST mAbs | Learn More >>

Product listing: Hoechst 33342 #4082 to Protein G Agarose Beads #37478

$61
25 mg
Hoechst 33342 (bisBenzimide H33342 trihydrochloride) is supplied as a lyophilized powder in 25 mg units. It can be used to examine cellular DNA in most fluorescent applications.
APPLICATIONS

Application Methods: Flow Cytometry, Immunofluorescence (Immunocytochemistry)

$208
10 x 50 ug
500 µg
MitoTracker® Deep Red FM is well retained after fixation allowing for further sample processing and immunostaining. Excitation: 644 nm, Emission: 665 nm, Molecular Weight: 543.58 g/mol
APPLICATIONS

Application Methods: Immunofluorescence (Immunocytochemistry)

$208
10 x 50 ug
500 µg
MitoTracker® Green FM is recommended for live cell imaging only; fixation with aldehydes or alcohols will inhibit staining. Excitation: 490 nm, Emission: 516 nm, Molecular Weight: 671.88 g/mol
APPLICATIONS

Application Methods: Immunofluorescence (Immunocytochemistry)

$208
10 x 50 ug
500 µg
MitoTracker® Red CMXRos is well retained after fixation allowing for further sample processing and immunostaining. Excitation: 579 nm, Emission: 599 nm, Molecular Weight: 531.52
APPLICATIONS
REACTIVITY
All Species Expected

Application Methods: Immunofluorescence (Immunocytochemistry)

$124
100 ml
APPLICATIONS

Application Methods: Flow Cytometry, Immunofluorescence (Frozen), Immunofluorescence (Immunocytochemistry), Immunofluorescence (Paraffin)

$168
50 µg
Molecular Weight:540.73 g/mol
APPLICATIONS
REACTIVITY
All Species Expected

Application Methods: Immunofluorescence (Immunocytochemistry)

$714
24 assays
1 Kit
Next generation sequencing (NG-seq) is a high throughput method that can be used downstream of chromatin immunoprecipitation (ChIP) assays to identify and quantify target DNA enrichment across the entire genome. The SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® contains all of the enzymes and buffers necessary to generate high quality DNA sequencing libraries from ChIP DNA for next-generation sequencing on the Illumina® platform. The fast, user-friendly workflow minimizes hands-on time needed for generation and purification of DNA libraries. This product must be used in combination with SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Single Index Primers) #29580 or SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) #47538.This product provides sufficient amounts of reagents for 24 reactions and is compatible with both enzymatic- and sonication-fragmented, ChIP-enriched DNA. This product is compatible with SimpleChIP® Enzymatic Chromatin IP Kit (Magnetic Beads) #9003, SimpleChIP® Plus Enzymatic Chromatin IP Kit (Magnetic Beads) #9005, and SimpleChIP® Plus Sonication Chromatin IP Kit #56383. This product is not compatible with SimpleChIP® Enzymatic Chromatin IP Kit (Agarose Beads) #9002 and SimpleChIP® Plus Enzymatic Chromatin IP Kit (Agarose Beads) #9004 because agarose beads are blocked with sonicated salmon sperm DNA, which will contaminate DNA library preps and NG-seq.
REACTIVITY
All Species Expected

Background: The chromatin immunoprecipitation (ChIP) assay is a powerful and versatile technique used for probing protein-DNA interactions within the natural chromatin context of the cell (1,2). This assay can be used to identify multiple proteins associated with a specific region of the genome, or the opposite, to identify the many regions of the genome bound by a particular protein (3-6). It can be used to determine the specific order of recruitment of various proteins to a gene promoter or to "measure" the relative amount of a particular histone modification across an entire gene locus (3,4). In addition to histone proteins, the ChIP assay can be used to analyze binding of transcription factors and co-factors, DNA replication factors and DNA repair proteins. When performing the ChIP assay, cells or tissues are first fixed with formaldehyde, a reversible protein-DNA cross-linking agent that "preserves" the protein-DNA interactions occurring in the cell (1,2). Cells are lysed and chromatin is harvested and fragmented using either sonication or enzymatic digestion. The chromatin is then immunoprecipitated with antibodies specific to a particular protein or histone modification. Any DNA sequences that are associated with the protein or histone modification of interest will co-precipitate as part of the cross-linked chromatin complex and the relative amount of that DNA sequence will be enriched by the immunoselection process. After immunoprecipitation, the protein-DNA cross-links are reversed and the DNA is purified. Standard PCR or Quantitative Real-Time PCR can be used to measure the amount of enrichment of a particular DNA sequence by a protein-specific immunoprecipitation (1,2). Alternatively, the ChIP assay can be combined with genomic tiling micro-array (ChIP on chip) techniques, high throughput sequencing, or cloning strategies, all of which allow for genome-wide analysis of protein-DNA interactions and histone modifications (5-8).

$561
30 immunoprecipitations
1 Kit
The SimpleChIP® Plus Enzymatic Chromatin IP Kit (Magnetic Beads) #9005 contains the buffers and reagents necessary to perform up to 30 chromatin immunoprecipitations from cells or tissue samples, and is optimized for 4 X 106 cells or 25 mg of tissue per immunoprecipitation. A complete assay can be performed in as little as two days and can easily be scaled up or down for use with more or less cells or tissue sample. This kit is compatable with ChIP-seq.Cells or tissue are fixed with formaldehyde and lysed, and chromatin is fragmented by partial digestion with Micrococcal Nuclease to obtain chromatin fragments of 1 to 5 nucleosomes. Enzymatic fragmentation of chromatin is much milder than sonication and eliminates problems resulting from variability in sonication power and emulsification of chromatin during sonication, which can result in incomplete fragmentation of chromatin or loss of antibody epitopes due to protein denaturation and degradation. Chromatin immunoprecipitations are performed using ChIP-validated antibodies and ChIP-Grade Protein G Magnetic Beads. After reversal of protein-DNA cross-links, the DNA is purified using DNA purification spin columns, allowing for easy and efficient recovery of DNA and removal of protein contaminants without the need for phenol/chloroform extractions and ethanol precipitations. The enrichment of particular DNA sequences during immunoprecipitation can be analyzed by a variety of methods, including standard PCR, quantitative real-time PCR, or amplification for ChIP on chip, sequencing or cloning techniques. This kit is compatible with ChIP-seq.The SimpleChIP® Plus Kit also provides important controls to ensure a successful ChIP experiment. The kit contains a positive control Histone H3 Antibody, a negative control Normal Rabbit IgG Antibody and primer sets for PCR detection of the human and mouse ribosomal protein L30 (RPL30) genes. Histone H3 is a core component of chromatin and is bound to most DNA sequences throughout the genome, including the RPL30 locus. Thus, the Histone H3 Antibody provides a universal positive control that should enrich for almost any locus examined.

Background: The chromatin immunoprecipitation (ChIP) assay is a powerful and versatile technique used for probing protein-DNA interactions within the natural chromatin context of the cell (1,2). This assay can be used to identify multiple proteins associated with a specific region of the genome, or the opposite, to identify the many regions of the genome bound by a particular protein (3-6). It can be used to determine the specific order of recruitment of various proteins to a gene promoter or to "measure" the relative amount of a particular histone modification across an entire gene locus (3,4). In addition to histone proteins, the ChIP assay can be used to analyze binding of transcription factors and co-factors, DNA replication factors and DNA repair proteins. When performing the ChIP assay, cells or tissues are first fixed with formaldehyde, a reversible protein-DNA cross-linking agent that "preserves" the protein-DNA interactions occurring in the cell (1,2). Cells are lysed and chromatin is harvested and fragmented using either sonication or enzymatic digestion. The chromatin is then immunoprecipitated with antibodies specific to a particular protein or histone modification. Any DNA sequences that are associated with the protein or histone modification of interest will co-precipitate as part of the cross-linked chromatin complex and the relative amount of that DNA sequence will be enriched by the immunoselection process. After immunoprecipitation, the protein-DNA cross-links are reversed and the DNA is purified. Standard PCR or Quantitative Real-Time PCR can be used to measure the amount of enrichment of a particular DNA sequence by a protein-specific immunoprecipitation (1,2). Alternatively, the ChIP assay can be combined with genomic tiling micro-array (ChIP on chip) techniques, high throughput sequencing, or cloning strategies, all of which allow for genome-wide analysis of protein-DNA interactions and histone modifications (5-8).

$478
24 immunoprecipitations
1 Kit
The SimpleChIP® Plus Sonication Chromatin IP Kit contains the buffers and reagents necessary to perform up to 24 chromatin immunoprecipitations from cells or tissue samples, and is optimized for 4 X 106 cells or 25 mg of tissue per immunoprecipitation. A complete assay can be performed in as little as two days and can easily be scaled up or down for use with more or less cells or tissue sample. This kit is compatible with both ChIP-qPCR and ChIP-seq.Cells or tissue are fixed with formaldehyde and lysed, and chromatin is fragmented by sonication to obtain chromatin fragments ranging from 200 to 1000 bp. Sonication-based fragmentation is the more traditional method for fragmenting chromatin; however, sonication should be optimized such that the desired fragment size is achieved with the minimal amount of sonication required, as over-sonication can result in a decrease in immunoprecipitation, specifically for transcription factors and cofactors. The cell and nuclear lysis buffers for this kit have been optimized to maximize enrichment of histones, transcription factors and cofactors. Chromatin immunoprecipitations are performed using ChIP-validated antibodies and ChIP-Grade Protein G Magnetic Beads. After reversal of protein-DNA cross-links, the DNA is purified using DNA purification spin columns, allowing for easy and efficient recovery of DNA and removal of protein contaminants without the need for phenol/chloroform extractions and ethanol precipitations. The enrichment of particular DNA sequences during immunoprecipitation can be analyzed by a variety of methods, including standard PCR, quantitative real-time PCR, or amplification for ChIP on chip, sequencing or cloning techniques.The SimpleChIP® Plus Kit also provides important controls to ensure a successful ChIP experiment. The kit contains a positive control Histone H3 Antibody, a negative control Normal Rabbit IgG Antibody, and primer sets for PCR detection of the human and mouse ribosomal protein L30 (RPL30) genes. Histone H3 is a core component of chromatin and is bound to most DNA sequences throughout the genome, including the RPL30 locus. Thus, the Histone H3 Antibody provides a universal positive control that should enrich for almost any locus examined.

Background: The chromatin immunoprecipitation (ChIP) assay is a powerful and versatile technique used for probing protein-DNA interactions within the natural chromatin context of the cell (1,2). This assay can be used to identify multiple proteins associated with a specific region of the genome, or the opposite, to identify the many regions of the genome bound by a particular protein (3-6). It can be used to determine the specific order of recruitment of various proteins to a gene promoter or to "measure" the relative amount of a particular histone modification across an entire gene locus (3,4). In addition to histone proteins, the ChIP assay can be used to analyze binding of transcription factors and co-factors, DNA replication factors and DNA repair proteins. When performing the ChIP assay, cells or tissues are first fixed with formaldehyde, a reversible protein-DNA cross-linking agent that "preserves" the protein-DNA interactions occurring in the cell (1,2). Cells are lysed and chromatin is harvested and fragmented using either sonication or enzymatic digestion. The chromatin is then immunoprecipitated with antibodies specific to a particular protein or histone modification. Any DNA sequences that are associated with the protein or histone modification of interest will co-precipitate as part of the cross-linked chromatin complex and the relative amount of that DNA sequence will be enriched by the immunoselection process. After immunoprecipitation, the protein-DNA cross-links are reversed and the DNA is purified. Standard PCR or Quantitative Real-Time PCR can be used to measure the amount of enrichment of a particular DNA sequence by a protein-specific immunoprecipitation (1,2). Alternatively, the ChIP assay can be combined with genomic tiling micro-array (ChIP on chip) techniques, high throughput sequencing, or cloning strategies, all of which allow for genome-wide analysis of protein-DNA interactions and histone modifications (5-8).

$336
96 assays
1 Kit
The Cyclic AMP XP® Assay Kit is a competition enzyme-linked immunoassay used to determine cAMP levels in cells or tissues of interest. In this assay, cAMP found in test sample competes with a fixed amount of HRP-linked cAMP for binding to an anti-cAMP XP® Rabbit mAb immobilized onto a 96-well plate. Following washing to remove excess sample cAMP and HRP-linked cAMP, HRP substrate TMB is added to develop color. Because of the competitive nature of this assay, the magnitude of the absorbance for this developed color is inversely proportional to the quantity of sample cAMP. Measurement of absorbance using the cAMP Standard allows calculating the absolute amount of cAMP in a sample of interest.Note: 12, 8-well modules -Each module is designed to break apart for 8 tests.
REACTIVITY
All Species Expected
$58
50 ml
$191
250 ml
TMB Substrate used is ready to use for ELISA detection. Reaction between the substrate and immobilized horseradish peroxidase (HRP) conjugated secondary antibodies in the ELISA wells produces a blue colored solution. Color intensity and development time will vary depending on assay sensitivity and conditions. After reaching the desired color intensity, the reaction is terminated by addition of an acidic STOP solution which changes the solution color from blue to yellow. While the results will remain stable for one hour following termination, the plate should be analyzed promptly on a microwell reader at 450 nm. TMB is light sensitive and is therefore packaged in amber bottles to protect the solution from direct sunlight. Recommended storage temperature is 4ºC.
REACTIVITY
All Species Expected
The BCA Protein Assay Kit can be used to measure the protein concentration of lysates or homogenates, in microplate format, prepared with the following buffers: Cell Lysis Buffer (10X) #9803, RIPA Buffer (10X) #9806, PathScan® Sandwich ELISA Lysis Buffer (1X) #7018. The dynamic range for this assay is 0.125 - 2 mg/mL. It is recommended that the BCA Compatibility Reagent be used to decrease interference from reducing agents, chelators, detergents, and other common ingredients found in most lysis buffers. Please see the attached protocol for additional details.
$30
25 ml each substrate
50 ml
$259
250 ml each substrate
500 ml
SignalFire™ ECL Reagent from Cell Signaling Technology (CST) is an enhanced chemiluminescent substrate capable of detecting picogram amounts of protein by western blot analysis. Compared to entry-substrates, SignalFire™ ECL Reagent boasts a more robust signal and extended duration of signal output. In the presence of hydrogen peroxide, horseradish peroxidase (HRP) converts luminol to an excited intermediate dianion. This dianion emits light on return to its ground state. Light emission is maximal immediately after exposure of the substrate to HRP and continues for 1 hour. Light can be captured on X-ray film, typically by exposure for a few seconds. Maximum sensitivity can be obtained with longer exposure.
APPLICATIONS

Application Methods: Western Blotting

Background: Chemiluminescence systems have emerged as the best all-around method for western blot detection. They eliminate the hazards associated with radioactive materials and toxic chromogenic substrates. The speed and sensitivity of these methods are unequalled by traditional alternatives, and because results are generated on film, it is possible to record and store data permanently. Blots detected with chemiluminescent methods are easily stripped for subsequent reprobing with additional antibodies. HRP-conjugated secondary antibodies are utilized in conjunction with specific chemiluminescent substrates to generate the light signal. HRP conjugates have a very high turnover rate, yielding good sensitivity with short reaction times.

$86
10 ml each substrate
20 ml
$390
50 ml each substrate
100 ml
SignalFire™ Elite ECL Reagent from Cell Signaling Technology (CST) is an ultra sensitive chemiluminescent substrate capable of detecting femtogram amounts of protein by western blot analysis. SignalFire™ Elite ECL Reagent is compatible with both film and digital imaging systems. The extremely intense signal output allows detection of very low abundance proteins, conservation of reagents, and short exposure times.SignalFire™ Elite ECL Reagent requires approximately ten-fold less Anti-rabbit IgG, HRP-linked Antibody #7074 or Anti-mouse IgG, HRP-linked Antibody #7076 than traditional ECL reagents. Limiting the amount of HRP exposed to the membrane prevents high background, oversaturation of the target protein signal, or false negative results. Other HRP-conjugated antibodies, including HRP-conjugated primary and anti-biotin-HRP antibodies, should be diluted similarly. Dilution of secondary antibody from alternative vendors may need to be optimized. Titration of lysate and primary antibody concentration is recommended to achieve optimal signal-to-noise ratio.
APPLICATIONS

Application Methods: Western Blotting

Background: Chemiluminescence systems have emerged as the best all-around method for western blot detection. They eliminate the hazards associated with radioactive materials and toxic chromogenic substrates. The speed and sensitivity of these methods are unequalled by traditional alternatives, and because results are generated on film, it is possible to record and store data permanently. Blots detected with chemiluminescent methods are easily stripped for subsequent reprobing with additional antibodies. HRP-conjugated secondary antibodies are utilized in conjunction with specific chemiluminescent substrates to generate the light signal. HRP conjugates have a very high turnover rate, yielding good sensitivity with short reaction times.

$42
120 slides
1 Kit
$140
1200 slides
1 Kit
The SignalStain® DAB Substrate Kit contains all of the necessary reagents to prepare a working solution of diaminobenzidine (DAB) for staining tissue sections. The DAB working solution reacts with peroxidase (HRP) detection systems such as the SignalStain® Boost IHC Detection Reagents (HRP, Rabbit #8114, and HRP, Mouse #8125), yielding a brown reaction product.
APPLICATIONS

Application Methods: Immunohistochemistry (Paraffin)

This kit provides an economical means to analyze major signaling checkpoints in response to DNA damage. The kit contains primary and secondary antibodies to perform two Western blots with each antibody.
The Epithelial-Mesenchymal Transition (EMT) Antibody Sampler Kit provides an economical means of evaluating EMT. The kit contains enough primary antibody to perform two western blots per primary.
$524
100 assays (96 well format)
1 Kit
The Glucose-6-Phosphate Dehydrogenase (G6PD) Activity Assay Kit contains the necessary reagents for rapid, sensitive, and simple detection of G6PD activity in various samples. In the assay, glucose-6-phosphate (G6P), in the presence of NADP, is oxidized by G6PD to generate 6-phosphogluconolactone and NADPH. The generated NADPH is then amplified by the diaphorase-cycling system to produce highly fluorescent resorufin molecules (see Figure 1). The relative fluorescent units (RFU) can then be determined using a plate reader with excitation about 540 nm and emission about 590 nm. The magnitude of RFU is proportional to G6PD activity in the sample.
REACTIVITY
All Species Expected

Background: Glucose-6-phosphate dehydrogenase (G6PD) catalyses the first, and rate-limiting, step of the pentose phosphate pathway (1). The NADPH generated from this reaction is essential to protect cells from oxidative stress (1). Research studies have shown that p53 interacts with G6PD and inhibits its activity, therefore suppressing glucose consumption through the pentose phosphate pathway (2). In cancer cells with p53 mutations, the increased glucose consumption is directed towards increased biosynthesis, which is critical for cancer cell proliferation (2).

$448
50 sections
1 Kit
The PD-L1, CD3ε, CD8α Multiplex IHC Antibody Panel enables researchers to simultaneously detect these targets in paraffin-embedded tissues using tyramide signal amplification. Each antibody in the panel has been validated for this approach. For recommended staining conditions optimized specifically for this antibody panel please refer to Table 1 on the Data Sheet.
REACTIVITY
Human

Background: The field of cancer immunotherapy is focused on empowering the immune system to fight cancer. This approach has seen recent success in the clinic with targeting immune checkpoint control proteins, such as PD-1 (1,2). Despite this success, clinical biomarkers that predict response to therapeutic strategies involving PD-1 receptor blockade are still under investigation (3-5). While PD-L1 expression has been linked with an increased likelihood of response to anti-PD-1 therapy, research studies have shown that additional factors, such as tumor-immune infiltration and the ratio of effector to regulatory T cells within the tumor, could play a significant role in predicting treatment outcome (6-9).

$448
50 sections
1 Kit
The PD-L1, FoxP3, CD8α Multiplex IHC Antibody Panel enables researchers to simultaneously detect these targets in paraffin-embedded tissues using tyramide signal amplification. Each antibody in the panel has been validated for this approach. For recommended staining conditions optimized specifically for this antibody panel please refer to Table 1 on the Data Sheet.
REACTIVITY
Human

Background: The field of cancer immunotherapy is focused on empowering the immune system to fight cancer. This approach has seen recent success in the clinic with targeting immune checkpoint control proteins, such as PD-1 (1,2). Despite this success, clinical biomarkers that predict response to therapeutic strategies involving PD-1 receptor blockade are still under investigation (3-5). While PD-L1 expression has been linked with an increased likelihood of response to anti-PD-1 therapy, research studies have shown that additional factors, such as tumor-immune infiltration and the ratio of effector to regulatory T cells within the tumor, could play a significant role in predicting treatment outcome (6-9).

$499
120 slides
1 Kit
SignalStain® Apoptosis (Cleaved Caspase-3) IHC Detection Kit allows the detection of activated caspase-3 in formalin-fixed paraffin-embedded human and mouse tissue samples. Cleaved Caspase-3 (Asp175) (D3E9) Rabbit mAb is detected by the polymer based, HRP-conjugated SignalStain® Boost IHC Detection Reagent in combination with SignalStain® DAB Diluent and Chromogen Concentrate. Also included is a concentration-matched rabbit monoclonal IgG control to verify the specificity of staining.This combination of reagents provides a sensitive and specific means of detecting apoptotic events in tissue samples.
APPLICATIONS
REACTIVITY
Human, Mouse

Application Methods: Immunohistochemistry (Paraffin)

Background: Caspase-3 (CPP-32, Apoptain, Yama, SCA-1) is a critical executioner of apoptosis, as it is either partially or totally responsible for the proteolytic cleavage of many key proteins, such as the nuclear enzyme poly (ADP-ribose) polymerase (PARP) (1). Activation of caspase-3 requires proteolytic processing of its inactive zymogen into activated p17 and p12 fragments. Cleavage of caspase-3 requires the aspartic acid residue at the P1 position (2).

The Methyl-Histone H3 (Lys27) Antibody Sampler Kit provides an economical means of detecting levels of mono-, di-, and tri-methyl histone H3 Lys27 using methyl-specific and control histone H3 antibodies. The kit contains enough primary antibodies to perform at least two western blot experiments.

Background: The nucleosome, made up of four core histone proteins (H2A, H2B, H3, and H4), is the primary building block of chromatin. Originally thought to function as a static scaffold for DNA packaging, histones have now been shown to be dynamic proteins, undergoing multiple types of post-translational modifications, including acetylation, phosphorylation, methylation, and ubiquitination (1). Histone methylation is a major determinant for the formation of active and inactive regions of the genome and is crucial for the proper programming of the genome during development (2,3). Arginine methylation of histones H3 (Arg2, 17, 26) and H4 (Arg3) promotes transcriptional activation and is mediated by a family of protein arginine methyltransferases (PRMTs), including the co-activators PRMT1 and CARM1 (PRMT4) (4). In contrast, a more diverse set of histone lysine methyltransferases has been identified, all but one of which contain a conserved catalytic SET domain originally identified in the Drosophila Su(var)3-9, Enhancer of zeste, and Trithorax proteins. Lysine methylation occurs primarily on histones H3 (Lys4, 9, 27, 36, 79) and H4 (Lys20) and has been implicated in both transcriptional activation and silencing (4). Methylation of these lysine residues coordinates the recruitment of chromatin modifying enzymes containing methyl-lysine binding modules such as chromodomains (HP1, PRC1), PHD fingers (BPTF, ING2), tudor domains (53BP1), and WD-40 domains (WDR5) (5-8). The discovery of histone demethylases such as PADI4, LSD1, JMJD1, JMJD2, and JHDM1 has shown that methylation is a reversible epigenetic marker (9).

$325
1 ea
The 12-Tube Magnetic Separation Rack is designed for quick and easy small-scale isolation of immunocomplexes using magnetic beads, such as our Protein A (#8687), Protein G (#8740), and ChIP-Grade Protein G (#9006) Magnetic Beads. It can be used with our SimpleChIP® (#9003) and SimpleChIP® Plus (#9005) Enzymatic Chromatin IP Kits. The rack holds up to twelve 1.5-2.0 ml tubes and contains six neodymium rare earth permanent magnets.CAUTION: This device contains rare earth magnets that can be extremely powerful. Care should be taken when handling. Keep magnetized parts away from mechanical/electrical instruments that may be damaged by high magnetic fields.
APPLICATIONS

Application Methods: Chromatin IP, Immunoprecipitation

$195
1 units
The Magnetic Separation Rack is designed for quick and easy small-scale isolation of immunocomplexes from chromatin immunoprecipitations (ChIP assays) using SimpleChIP® Enzymatic Chromatin IP Kit (Magnetic Beads) #9003 or ChIP-Grade Protein G Magnetic Beads #9006. The rack holds up to six 1.5-2.0 ml tubes and contains three neodymium rare earth permanent magnets. Rare earth magnets are extremely powerful and should be kept away from mechanical/electrical instruments which may be damaged by high magnetic fields.
APPLICATIONS

Application Methods: Chromatin IP, Immunoprecipitation

N,N-dimethylformamide (DMF) is a colorless, polar organic solvent widely used as a solvent for chemical reactions. DMF is miscible with water and many other organic solvents. DMF from Cell Signaling Technology is 99.9% pure and is recommended for use as a solvent for the chromogenic substrate X-gal with our Senescence β-Galactosidase Staining Kit #9860. The convenient 10 ml size is more than enough material to dissolve the 150 mg of X-Gal supplied in a single #9860 kit.
DMSO (Dimethyl Sulfoxide) is a colorless, dipolar, aprotic solvent that is widely used for chemical reactions. It is miscible with water and many other organic solvents. DMSO from Cell Signaling Technology is sterile and 99.9% pure. It is recommended for use as a solvent with many of our chemical modulators, as well as a cyroprotectant for cell cultures.
$69
10 immunoprecipitations
200 µl
$140
50 immunoprecipitations
1 ml
Protein A Agarose Beads are an affinity matrix for the small-scale isolation of immunocomplexes from immunoprecipitations (IP assays). Protein A is covalently coupled to agarose beads. Protein A exhibits high affinity for subclasses of IgG from many species (including human, rabbit, mouse, rat, and sheep) and can be used for immunoprecipitation assays with these antibodies.Product Specifications:Bead Diameter: 45-165 micron per beadBinding Capacity: 20 +/- 2 mg human IgG/ml
APPLICATIONS

Application Methods: Immunoprecipitation

$69
10 immunoprecipitations
200 µl
$140
50 immunoprecipitations
1 ml
Protein G Agarose Beads are an affinity matrix for the small-scale isolation of immunocomplexes from immunoprecipitations (IP assays). Protein G is covalently coupled to agarose beads. Protein G exhibits high affinity for subclasses of IgG from many species (including human, rabbit, mouse, rat, and sheep) and can be used for immunoprecipitation assays with these antibodies.Product Specifications:Bead Diameter: ~50-150 micron per beadBinding Capacity: ~20 mg human IgG/ml
APPLICATIONS
REACTIVITY
All Species Expected

Application Methods: Immunoprecipitation