|8019S||1 Kit (96 assays)||
|Product Includes||Quantity (with Count)||Solution Color|
|cAMP Rabbit mAb Coated Microwells||1 x 96 tests|
|cAMP-HRP Conjugate||1 x 5.5 ml||Red|
|cAMP Standard (2.4 uM)||1 x 0.5 ml|
|Luminol/Enhancer Solution||1 x 3 ml|
|Stable Peroxide Buffer||1 x 3 ml|
|Sealing Tape||1 x 2 ea|
|ELISA Wash Buffer (20X) 9801||1 x 10 ml|
|Cell Lysis Buffer (10X) 9803||1 x 15 ml|
NOTE: If cell debris is observed it can be removed by brief centrifugation of the plate and transfer of the clear lysates to a new 96 well plate.
Make cAMP standard in the 1X Cell Lysis buffer: Take 50 µl of the cAMP standard (2.4 µM) and add it to 450 µl diluent to get 240 nM cAMP. Perform a 1:3 serial dilution of this standard to get 80 nM, 26.7 nM, 8.9 nM, 3.0 nM, 1.0 nM, 0.3 nM,and 0 nM. The diluent without cAMP will serve as the 0 nM cAMP.
NOTE: The standard curve is used to calculate the absolute amount of cAMP in the sample and is necessary for each assay.
Use a plate-based luminometer to measure Relative Light Units (RLU) at 425nM within 1-10 minutes following addition of the substrate. Optimal signal intensity is achieved when read within 10 minutes.
Protocol Id: 506
Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.
Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.