View Featured Offers >>
48513
TUNEL Assay Kit (Fluorescence, 594 nm)
Cellular Assay Kits
Assay Kit

TUNEL Assay Kit (Fluorescence, 594 nm) #48513

Citations (0)
Confocal analysis of paraffin-embedded human colon carcinoma using TUNEL Assay Kit (Fluorescence, 594 nm) (red) followed by staining with Cleaved Caspase-3 (Asp175) (5A1E) Rabbit mAb #9664 (green) and DAPI #4083 (blue).
Confocal analysis of paraffin-embedded HT-29 xenograft using TUNEL Assay Kit (Fluorescence, 594 nm) (red) and DAPI #4083 (blue).
Confocal analysis of HeLa cells, treated with Staurosporine #9953 (1 µM, 3 hr; left, positive) or untreated (right, negative), using TUNEL Assay Kit (Fluorescence, 594 nm) (red) followed by staining with Cleaved Caspase-3 (Asp175) Antibody #9661 (green) and DAPI #4083 (blue).
Confocal analysis of a fixed frozen E14.5 mouse digit at low magnification (left) and high magnification (right) using TUNEL Assay Kit (Fluorescence, 594 nm) (red) followed by staining with Cleaved Caspase-3 (Asp175) (5A1E) Rabbit mAb #9664 (green) and DAPI #4083 (blue).
Flow cytometric analysis of Jurkat cells, untreated (blue) or treated with Staurosporine #9953 (1 μM, 3 hr; green), unlabeled (dashed lines) or labeled with TUNEL Assay Kit (Fluorescence, 594 nm) (solid lines).
To Purchase # 48513
Cat. # Size Qty. Price
48513S
1 Kit  (50 assays)

Product Includes Quantity (with Count)
TUNEL Assay Equilibration Buffer 1 x 5 ml
CF® 594 TUNEL Reaction Buffer 5 x 500 µl
TdT Enzyme 1 x 50 µl

Protocol

PRINT

View >Collapse >

Fluorescent TUNEL Protocol for Paraffin Embedded Samples

A. Solutions and Reagents

Supplied Reagents

NOTE: Store at -20°C and avoid freeze/thaw cycles.

  1. TUNEL Equilibration Buffer (1 bottle, 5 mL)
  2. CF® Dye TUNEL Reaction Buffer (5 vials, 500 µL each): Protect from light.
  3. TdT Enzyme (1 vial, 50 µL): Supplied as 50X concentrate. Keep on ice during use.

IMPORTANT: TUNEL Equilibration Buffer and CF® Dye TUNEL Reaction Buffer contain cacodylate and cobalt chloride. Handle in accordance with the SDS and discard as toxic waste.

Additional Reagents (Not Supplied)

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. Xylene
  2. Ethanol, anhydrous denatured, histological grade (100% and 95%).
  3. 10X Phosphate Buffered Saline (10X PBS): To prepare 1 L add 80 g sodium chloride (NaCl), 2 g potassium chloride (KCl), 14.4 g sodium phosphate, dibasic (Na2HPO4) and 2.4 g potassium phosphate, monobasic (KH2PO4) to 1 L dH2O. Adjust pH to 7.4.
  4. 1X Phosphate Buffered Saline (PBS): To prepare 1 L add 100 mL 10X PBS to 900 mL dH2O.
  5. 1X Phosphate Buffered Saline with Triton X-100 and BSA (PBS-TB): To prepare 100 mL 1X PBS-TB, add 10 mL 10X PBS, 200 µL Triton X-100, and 0.5 g BSA (#9998) to 90 mL dH2O, mix. Adjust pH to 7.4.
  6. Proteinase K Solution: For use dilute Proteinase K (#10012) to 20 µg/ml in dH2O.
  7. 1X Citrate Unmasking Solution (optional alternative to Proteinase K Solution): To prepare 250 ml of 1X citrate unmasking solution, dilute 25 ml of SignalStain® Citrate Unmasking Solution (10X) (#14746) with 225 ml of dH2O.

B. TUNEL Procedure

General Considerations:

  • Samples should be kept in a humidity chamber while running the TUNEL assay. Do not allow samples to dry at any time during this procedure.
  • All subsequent incubations should be carried out at room temperature (20-25°C) unless noted otherwise.
  • Heat-mediated antigen retrieval is recommended if co-labeling with an antibody is attempted.

Sample Preparation

  1. Deparaffinize/rehydrate:
    1. Incubate sections in three washes of xylene for 5 min each.
    2. Incubate sections in two washes of 100% ethanol for 10 min each.
    3. Incubate sections in two washes of 95% ethanol for 10 min each.
  2. Wash: Rinse two times in PBS for 5 min each.
  3. Antigen Retrieval: Incubate samples with Proteinase K solution for 30 min. Incubation time and temperature may require optimization depending on tissue type.
    1. Alternatively Citrate Unmasking Solution can be used: Heat slides in a microwave submersed in 1X citrate unmasking solution until boiling is initiated; follow with 10 min at sub-boiling temperature (95°-98°). Cool slides on bench top for 30 min.
  4. Wash: Rinse two times in PBS for 5 min each.

TUNEL Reaction

  1. Preparation: Incubate samples with 100 µL TUNEL Equilibration Buffer or enough to cover the sample for 5 min.
  2. Detection: Immediately before use, prepare TUNEL reaction mix by adding 1 µL of TdT Enzyme to 50 µL of TUNEL Reaction Buffer for each labeling reaction. Remove Equilibration Buffer and add 50 µL (or enough to cover the sample) of TUNEL reaction mix to each sample.
  3. Incubate: Incubate for 60 min at 37°C, protected from light. Tissue sections may require 2 hours of incubation at 37°C also protected from light.
  4. Wash: Rinse three times in PBS-TB for 5 min each.
  5. Co-label: If desired, proceed with immunostaining for co-labeling. Consult with the manufacturer's protocol for the recommended staining conditions.
  6. Mount: Mount samples in a compatible anti-fade medium such ProLong® Gold Antifade Reagent (#9071).

Protocol Id: 2624

Fluorescent TUNEL Protocol for Cultured Cells and Frozen Tissues

A. Solutions and Reagents

Supplied Reagents

NOTE: Store at -20°C and avoid freeze/thaw cycles.

  1. TUNEL Equilibration Buffer (1 bottle, 5 mL).
  2. CF® Dye TUNEL Reaction Buffer (5 vials, 500 µL each): Protect from light.
  3. TdT Enzyme (1 vial, 50 µL): Supplied as 50X concentrate. Keep on ice during use.

IMPORTANT: TUNEL Equilibration Buffer and CF® Dye TUNEL Reaction Buffer contain cacodylate and cobalt chloride. Handle in accordance with the SDS and discard as toxic waste.

Additional Reagents (Not Supplied)

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. 10X Phosphate Buffered Saline (10X PBS): To prepare 1 L add 80 g sodium chloride (NaCl), 2 g potassium chloride (KCl), 14.4 g sodium phosphate, dibasic (Na2HPO4) and 2.4 g potassium phosphate, monobasic (KH2PO4) to 1 L dH2O. Adjust pH to 7.4.
  2. 1X Phosphate Buffered Saline (PBS): To prepare 1 L add 100 mL 10X PBS to 900 mL dH2O.
  3. 1X Phosphate Buffered Saline with Triton X-100 and BSA (PBS-TB): To prepare 100 mL 1X PBS-TB, add 10 mL 10X PBS, 200 µL Triton X-100, and 0.5 g BSA (#9998) to 90 mL dH2O, mix. Adjust pH to 7.4.
  4. 4% Formaldehyde, Methanol-Free (#47746): Use fresh.

B. TUNEL Procedure

General Considerations:

  • Samples should be kept in a humidity chamber while running the TUNEL assay. Do not allow samples to dry at any time during this procedure.
  • All subsequent incubations should be carried out at room temperature (20-25°C) unless noted otherwise.
  • Apoptotic cells in adherent cultures are loosely adherent and may be lost during washing. These can be captured in the supernatant and used if desired.

Fixation and Permeabilization

  1. Fixation: Samples should be fixed using a gentle cross-linking fixative.
    1. Cells: incubate in 4% formaldehyde for 15 - 30 minutes.
    2. Unfixed frozen tissue: after cryosectioning, briefly allow samples to come to room temperature and dry, then incubate in 4% formaldehyde for 15 - 30 minutes.
    3. Fixed frozen tissue: proceed directly to permeabilization below (step 3).
  2. Wash: Rinse two times in PBS for 5 min each.
  3. Permeabilize: Incubate in PBS-TB for 30 min.
  4. Wash: Rinse two times in PBS for 5 min each.

TUNEL Reaction

  1. Preparation: Incubate samples with 100 µL (or enough to cover the sample) TUNEL Equilibration Buffer for 5 min.
  2. Detection: Immediately before use, prepare TUNEL reaction mix by adding 1 µL of TdT Enzyme to 50 µL of TUNEL Reaction Buffer for each labeling reaction. Remove Equilibration Buffer and add 50 µL (or enough to cover the sample) of TUNEL reaction mix to each sample.
  3. Incubate: For cell staining, incubate for 60 min at 37°C, protected from light. Tissue staining may require up to 2 hours of incubation at 37°C also protected from light.
  4. Wash: Rinse three times in PBS-TB for 5 min each.
  5. Co-label: If desired, proceed with immunostaining. Consult with the manufacturer’s recommendations to confirm the primary antibody is compatible with this protocol's fixation and permeabilization conditions. Otherwise continue on to step 6.
  6. Mount: Mount samples in a compatible anti-fade medium such as ProLong® Gold Antifade Reagent (#9071).

Protocol Id: 2608

Fluorescent TUNEL Protocol for Flow Cytometry

A. Solutions and Reagents

Supplied Reagents

NOTE: Store at -20°C and avoid freeze/thaw cycles.

  1. TUNEL Equilibration Buffer (1 bottle, 5 mL).
  2. CF® Dye TUNEL Reaction Buffer (5 vials, 500 µL each): Protect from light.
  3. TdT Enzyme (1 vial, 50 µL): Supplied as 50X concentrate. Keep on ice during use.

IMPORTANT: TUNEL Equilibration Buffer and CF® Dye TUNEL Reaction Buffer contain cacodylate and cobalt chloride. Handle in accordance with the SDS and discard as toxic waste.

Additional Reagents (Not Supplied)

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. 1X Phosphate Buffered Saline (PBS): To prepare 1 L 1X PBS: add 100 ml 10X PBS (#12528) to 900 ml water.
  2. 4% Formaldehyde, Methanol-Free (#47746)
  3. 100% Methanol (#13604), or Cell Permeabilization Buffer (Triton X-100) (#39487)
  4. (OPTIONAL) Antibody Dilution Buffer: Purchase ready-to-use Flow Cytometry Antibody Dilution Buffer (#13616), or prepare a 0.5% BSA PBS buffer by dissolving 0.5 g Bovine Serum Albumin (BSA) (#9998) in 100 ml 1X PBS. Store at 4°C.

B. TUNEL Procedure

General Considerations:

  • Do not allow samples to dry at any time during this procedure.
  • All incubations should be carried out at room temperature (20-25°C) unless noted otherwise.

Fixation

    NOTE: Adherent cells or tissue should be dissociated and in single-cell suspension prior to fixation.

    NOTE: Optimal centrifugation conditions will vary depending upon cell type and reagent volume. Generally, 150-300g for 1-5 minutes will be sufficient to pellet the cells.

    NOTE: If using whole blood, lyse red blood cells and wash by centrifugation prior to fixation.

  1. Pellet cells by centrifugation and remove supernatant.
  2. Resuspend cells in approximately 100 µl 4% formaldehyde per 1 million cells. Mix well to dissociate pellet and prevent cross-linking of individual cells.
  3. Fix for 15 min at room temperature (20-25°C).
  4. Wash by centrifugation with excess 1X PBS. Discard supernatant in appropriate waste container. Resuspend cells in 0.5-1 ml 1X PBS. Proceed to Permeabilization step.
    1. Alternatively, cells may be stored overnight at 4°C in 1X PBS.

Permeabilization

NOTE: Permeabilization is required for the completion of the TUNEL reaction. If immunostaining will be performed as part of the TUNEL assay, select a permeabilization method that is compatible with the antibody or antibodies used in your assay.

  1. Permeabilize cells by adding ice-cold 100% methanol slowly to pre-chilled cells, while gently vortexing, to a final concentration of 90% methanol.
  2. Permeabilize for a minimum of 10 min on ice.
  3. Proceed with TUNEL Reaction or store cells at -20°C in 90% methanol.

Alternatively, permeabilize with Cell Permeabilization Buffer (Triton X-100) (#39487), using approximately 100 µl per 1 million cells. Incubate 10 min at room temperature.

TUNEL Reaction

NOTE: Count cells using a hemocytometer or alternative method.

  1. If necessary, aliquot desired number of cells into tubes or wells. (Generally, 5x105 to 1x106 cells per assay.)
  2. Wash cells by centrifugation in excess 1X PBS. Discard supernatant in appropriate waste container.
  3. Incubate samples with 100 µl TUNEL Equilibration Buffer for 5 min.
  4. Immediately before use, prepare TUNEL reaction mix by adding 1 µl of TdT Enzyme to 50 µl of TUNEL Reaction Buffer for each labeling reaction. Pellet cells via centrifugation, remove Equilibration Buffer and add 50 µl of TUNEL reaction mix to each sample.
  5. Incubate for 60 min at 37°C, protected from light.
  6. Wash by centrifugation in 1X PBS. Discard supernatant. Repeat.
  7. If desired, proceed with immunostaining. Otherwise proceed to step 8.
  8. Resuspend cells in 200 – 500 µl of 1X PBS and analyze on flow cytometer.

Protocol Id: 2664

Product Description

TUNEL (terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling) is a method by which a fluorophore conjugated nucleotide is enzymatically linked to the 3′ end of fragmented DNA. Since DNA fragmentation is a hallmark of apoptosis, the TUNEL assay has become a well established method to monitor apoptosis in situ.

The TUNEL Assay Kit (Fluorescence, 594 nm) provides you with the buffers, enzyme, and dUTP fluorophore conjugate necessary to complete the TUNEL reaction in fixed cells or tissue. This kit is intended for use with fluorescence microscopy and/or flow cytometry.

Fluorescent Properties

  • Excitation maximum = 593 nm/Emission maximum = 614 nm

Specificity / Sensitivity

Tissue processing or cell degradation may result in labeling of nuclei in non-apoptotic cells.

Background

Apoptosis is a regulated cellular suicide mechanism characterized by nuclear condensation, cell shrinkage, membrane blebbing, and DNA fragmentation (1). During late stages of apoptosis, DNA is fragmented by an endonuclease that cleaves the chromatin into nucleosomal units which can be visualized on gels as DNA laddering (2). DNA fragmentation also serves as a basis for monitoring apoptosis in situ using the TUNEL assay (3). In this assay, terminal deoxynucleotidyl transferase enzymatically incorporates a fluorophore conjugated nucleotide to the 3' end of fragmented DNA. Apoptosis can be monitored by an increase in TUNEL staining within intact cells.

Limited Uses

Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.

Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.

For Research Use Only. Not for Use in Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit our Trademark Information page.