Buy a SimpleChIP kit and receive a sample of our new Universal qPCR Master Mix* | Learn More >>
47538
SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers)

SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) #47538

SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) Protocol

Next generation sequencing (NG-seq) is a high throughput method that can be used
downstream of chromatin immunoprecipitation (ChIP) assays to identify and quantify target
DNA enrichment across the entire genome. SimpleChIP® ChIP-seq Multiplex Oligos for
Illumina® (Dual Index Primers) contains adaptors and primers that are ideally suited for
multiplex sample preparation for NG-seq on the Illumina® platform (Illumina, Inc.). This
kit can be used to generate up to 96 distinct, barcoded ChIP-seq DNA libraries that can be
combined into a single sequencing reaction.

Each kit component must pass rigorous quality control standards, and for each new lot the
entire set of reagents is functionally validated together by construction and sequencing of
indexed libraries on the Illumina® sequencing platform.

This product provides enough reagents to support up to 96 DNA sequencing libraries,
and must be used in combination with SimpleChIP® ChIP-seq DNA Library Prep Kit for
Illumina® #56795.

Compatible SimpleChIP® kits:
SimpleChIP® Enzymatic Chromatin IP Kit (Magnetic Beads) #9003
SimpleChIP® Plus Enzymatic Chromatin IP Kit (Magnetic Beads) #9005
SimpleChIP® Plus Sonication Chromatin IP Kit #56383
SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795

Non-Compatible SimpleChIP® kits:
SimpleChIP® Enzymatic Chromatin IP Kit (Agarose Beads) #9002
SimpleChIP® Plus Enzymatic Chromatin IP Kit (Agarose Beads) #9004
Note: Agarose beads are blocked with sonicated salmon sperm DNA, which will contami-
nate DNA library preps and NG-seq.

Required Reagents:
Reagents Included:

  1. (red) Adaptor for Illumina® #42436
  2. (red) USER Enzyme #59713
  3. º (white) Index 501 Primer for Illumina® #86676
  4. º (white) Index 502 Primer for Illumina® #92596
  5. º (white) Index 503 Primer for Illumina® #29576
  6. º (white) Index 504 Primer for Illumina® #46325
  7. º (white) Index 505 Primer for Illumina® #67343
  8. º (white) Index 506 Primer for Illumina® #89663
  9. º (white) Index 507 Primer for Illumina® #27649
  10. º (white) Index 508 Primer for Illumina® #40566
  11. (orange) Index 701 Primer for Illumina® #60797
  12. (orange) Index 702 Primer for Illumina® #79999
  13. (orange) Index 703 Primer for Illumina® #18697
  14. SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) Protocol

    Next generation sequencing (NG-seq) is a high throughput method that can be used
    downstream of chromatin immunoprecipitation (ChIP) assays to identify and quantify target
    DNA enrichment across the entire genome. SimpleChIP® ChIP-seq Multiplex Oligos for
    Illumina® (Dual Index Primers) contains adaptors and primers that are ideally suited for
    multiplex sample preparation for NG-seq on the Illumina® platform (Illumina, Inc.). This
    kit can be used to generate up to 96 distinct, barcoded ChIP-seq DNA libraries that can be
    combined into a single sequencing reaction.

    Each kit component must pass rigorous quality control standards, and for each new lot the
    entire set of reagents is functionally validated together by construction and sequencing of
    indexed libraries on the Illumina® sequencing platform.

    This product provides enough reagents to support up to 96 DNA sequencing libraries,
    and must be used in combination with SimpleChIP® ChIP-seq DNA Library Prep Kit for
    Illumina® #56795.

    Compatible SimpleChIP® kits:
    SimpleChIP® Enzymatic Chromatin IP Kit (Magnetic Beads) #9003
    SimpleChIP® Plus Enzymatic Chromatin IP Kit (Magnetic Beads) #9005
    SimpleChIP® Plus Sonication Chromatin IP Kit #56383
    SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795

    Non-Compatible SimpleChIP® kits:
    SimpleChIP® Enzymatic Chromatin IP Kit (Agarose Beads) #9002
    SimpleChIP® Plus Enzymatic Chromatin IP Kit (Agarose Beads) #9004
    Note: Agarose beads are blocked with sonicated salmon sperm DNA, which will contami-
    nate DNA library preps and NG-seq.

    Required Reagents:
    Reagents Included:

    1. (red) Adaptor for Illumina® #42436
    2. (red) USER Enzyme #59713
    3. º (white) Index 501 Primer for Illumina® #86676
    4. º (white) Index 502 Primer for Illumina® #92596
    5. º (white) Index 503 Primer for Illumina® #29576
    6. º (white) Index 504 Primer for Illumina® #46325
    7. º (white) Index 505 Primer for Illumina® #67343
    8. º (white) Index 506 Primer for Illumina® #89663
    9. º (white) Index 507 Primer for Illumina® #27649
    10. º (white) Index 508 Primer for Illumina® #40566
    11. (orange) Index 701 Primer for Illumina® #60797
    12. (orange) Index 702 Primer for Illumina® #79999
    13. (orange) Index 703 Primer for Illumina® #18697
    14. (orange) Index 704 Primer for Illumina® #26125
    15. (orange) Index 705 Primer for Illumina® #39467
    16. (orange) Index 706 Primer for Illumina® #51808
    17. (orange) Index 707 Primer for Illumina® #58724
    18. (orange) Index 708 Primer for Illumina® #65787
    19. (orange) Index 709 Primer for Illumina® #75272
    20. (orange) Index 710 Primer for Illumina® #99422
    21. (orange) Index 711 Primer for Illumina® #10812
    22. (orange) Index 712 Primer for Illumina® #38569
    23. Index Primer Orange Tube Caps #54631
    24. Index Primer White Tube Caps #70942

    Reagents Not Included:

    1. Enzymes and buffers appropriate for ChIP Illumina® library preparation: provided in SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795
    2. Nuclease-free Water #12931
    3. AMPure® XP Beads (Beckman Coulter, Inc. #A63881) or SPRIselect® Reagent Kit (Beckman Coulter, Inc. #B23317)
    4. Freshly prepared 80% Ethanol
    5. 1X TE (10 mM Tris-HCl, pH 8.0, 1 mM EDTA)
    6. 10 mM Tris-HCl (pH 8.0-8.5)
    7. Magnetic Separation Rack #7017/#14654
    8. Bioanalyzer® and Agilent High Sensitivity DNA Kit (Agilent Technologies, Inc.) PCR
      tubes and PCR

    I. Low Plexity Pooling Guidelines:

    The dual index primer strategy utilizes two 8 base indices within each primer. Index 7 primers contain indices that are adjacent to the P7 sequence while index 5 primers contain indices that are adjacent to the P5 sequence. Dual indexing is enabled by adding a unique index to both ends of a sample to be sequenced. Up to 96 different samples can be uniquely indexed by combining each of the 12 index 7 primers with each of the 8 index 5 primers.

    Illumina® NG-seq platforms use a red laser/LED to sequence A/C and a green laser/LED to sequence G/T. For each cycle, both the red and the green channel need to be read to ensure proper image registration (i.e. A or C must be present in each cycle, and G or T must be present in each cycle). If this color balance is not maintained, sequencing the index read could fail. Please check the sequences of each index to be used to ensure that you will have signal in both the red and green channels for every cycle. See example below:

    The following table lists some (but not all) valid index combinations that can be sequenced together:

    Some other valid combinations are listed below. Choose a valid set of Index 7 primers and a valid set of Index 5 primers. Use each Index 7 primer with each i5 primer to form desired number of primer pairs for PCR amplification of desired number of libraries.


    II. Index 5 Primers for Illumina®:

    Each Index 5 Primer for Illumina® is provided in volume of 60 µl.

    Where -s- indicates phosphorothioate bond.

    III. Index 7 Primers for Illumina®:

    Each Index 7 Primer for Illumina® is provided in a volume of 40 µl.

    Where -s- indicates phosphorothioate bond.

    IV. Set up the PCR Reaction

    1. Ensure that a valid combination of index 7 and index 5 primers is used. See Section I and II to verify that correct primer combinations have been selected.
    2. Add only one Index 5 primer (º) (5 µl) and only one Index 7 primer () (5 µl) to each PCR tube. It is critical to change tips between tubes to avoid cross-contamination. If necessary, discard the original Index 5 white caps or Index 7 orange caps and apply new caps to avoid index cross-contamination.
    3. Record the Index 5 and Index 7 primers added to each PCR tube.
    4. Add 25 µl Q5® PCR Master Mix () to each tube that contains primers.
    5. Add 15 µl of adaptor ligated DNA for a final volume of 50 µl to the corresponding tube. Gently pipette up and down 5–10 times to mix. It is critical to change tips between samples to avoid cross-contamination.
    6. Record the adaptor ligated DNA sample added to each PCR tube.
    7. Quickly centrifuge and perform PCR according to recommended cycling conditions (refer to the protocol for SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795).

    APPENDIX: Quality Control of the Kit Components

    The components in the SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) #47538 are individually validated by the functional testing listed below and must pass rigorous quality control standards. Furthermore, each set of components is functionally validated together by construction and sequencing of indexed libraries on the Illumina® sequencing platform.

    I. Adaptor for Illumina® (15 µM) ()

    5´-/5Phos/GAT CGG AAG AGC ACA CGT CTG AAC TCC AGT C/ideoxyU/A CAC TCT TTC CCT ACA CGA CGC TCT TCC GAT C-s-T-3´

    Quality Control Assays

    1. 16-Hour Incubation: 50 µl reactions containing this adaptor and 1 µg of HindIII digested Lambda DNA incubated for 16 hours at 37°C results in no detectable non-specific nuclease degradation as determined by agarose gel electrophoresis. 50 µl reactions containing this reaction buffer at 1X concentration and 1 µg T3 DNA incubated for 16 hours at 37°C also results in no detectable non-specific nuclease degradation as determined by agarose gel electrophoresis.
    2. Endonuclease Activity: Incubation of a minimum of 5 µl of this adaptor with 1 µg of φX174 RF 1 DNA in assay buffer for 4 hours at 37°C in 50 µl reactions results in < 10% conversion to RF II as determined by agarose gel electrophoresis.
    3. Phosphatase Activity: Incubation of a minimum of 10 µl of this adaptor in protein phosphatase assay buffer (1 M diethanolamine @ pH 9.8 and 0.5 mM MgCl2) containing 2.5 mM p-nitrophenyl phosphate at 37°C for 4 hours yields no detectable p-nitrophenylene anion as determined by spectrophotometric analysis at 405 nm.
    4. RNase Activity: Incubation of this adaptor with 40 ng of a FAM-labeled RNA transcript for 16 hours at 37°C results in no detectable RNase activity as determined by polyacrylamide gel electrophoresis.

    II. USER Enyzme ()

    Supplied in: 50 mM KCl, 5 mM NaCl, 10 mM Tris-HCl (pH 7.4 @ 25°C), 0.1 mM EDTA, 1 mM DTT, 175 µg/ml BSA, and 50% Glycerol

    Quality Control Assays

    1. Non-Specific DNase Activity (16 Hour): A 50 µl reaction in NEBuffer 1 containing 1 µg of Lambda DNA and a minimum of 50 units of Uracil DNA Glycosylase incubated for 16 hours at 37°C results in a DNA pattern free of detectable nuclease degradation as determined by agarose gel electrophoresis. A 50 µl reaction in Endonuclease VIII Reaction Buffer containing 1 µg of Lambda-HindIII DNA and a minimum of 25 units of Endonuclease VIII incubated for 16 hours at 37°C results in a DNA pattern free of detectable nuclease degradation as determined by agarose gel electrophoresis.
    2. Exonuclease Activity (Radioactivity Release): A 50 µl reaction in NEBuffer 1 containing 1 µg of a mixture of single and double-stranded [3H] E. coli DNA and a minimum of 50 units of Uracil DNA Glycosylase incubated for 4 hours at 37°C releases < 0.1% of the total radioactivity. A 50 µl reaction in Endonuclease VIII Reaction Buffer containing 1 µg of a mixture of single and double-stranded [3H] E. coli DNA and a minimum of 10 units of Endonuclease VIII incubated for 4 hours at 37°C releases < 0.5% of the total radioactivity.
    3. Endonuclease Activity (Nicking): A 50 µl reaction in UDG Reaction Buffer containing 1 µg of supercoiled φX174 DNA and a minimum of 50 units of Uracil DNA Glycosylase incubated for 4 hours at 37°C results in < 10% conversion to the nicked form as determined by agarose gel electrophoresis.
    4. Phosphatase Activity: Incubation of a minimum of 10 µl of USER at a 1X concentration in protein phosphatase assay buffer (1 M diethanolamine @ pH 9.8 and 0.5 mM MgCl2) containing 2.5 mM p-nitrophenyl phosphate at 37°C for 4 hours yields no detectable p-nitrophenylene anion as determined by spectrophotometric analysis at 405 nm.

    III. Index 5 and Index 7 Primers for Illumina® (10 µM) (º)

    Quality Control Assays

    1. 16-Hour Incubation: 50 µl reactions containing 1 µl Index [X] Primer for Illumina® and 1 µg of HindIII digested Lambda DNA incubated for 16 hours at 37°C results in no detectable non-specific nuclease degradation as determined by agarose gel electrophoresis. 50 µl reactions containing Index [X] Primer for Illumina® and 1 µg of T3 DNA incubated for 16 hours at 37°C results in no detectable non-specific nuclease degradation as determined by agarose gel electrophoresis.
    2. Endonuclease Activity: Incubation of a 50 µl reaction containing 1 µl Index [X] Primer for Illumina® with 1 µg of φX174 RF I supercoiled DNA for 4 hours at 37°C results in less than 10% conversion to RF II (nicked molecules) as determined by agarose gel electrophoresis.
    3. RNase Activity: Incubation of a 10 µl reaction containing 1 µl Index [X] Primer for Illumina® with 40 ng of RNA transcript for 16 hours at 37°C resulted in no detectable degradation of RNA as determined by gel electrophoresis.
    4. Phosphatase Activity: Incubation of Index [X] Primer for Illumina® in protein phosphatase assay buffer (1 M diethanolamine @ pH 9.8 and 0.5 mM MgCl2) containing 2.5 mM p-nitrophenyl phosphate at 37°C for 4 hours yields no detectable p-nitrophenylene anion as determined by spectrophotometric analysis at 405 nm.

     

    posted November 2017

    protocol id: 1625

Product Includes Volume (with Count) Storage Temp
Adaptor for Illumina® 1 x 960 µl -20°C
USER® Enzyme 1 x 288 µl -20°C
Index Primer Orange Tube Caps 1 x 24 ea RT
Index Primer White Tube Caps 1 x 16 ea RT
Index 501 Primer for Illumina® 1 x 60 µl -20°C
Index 502 Primer for Illumina® 1 x 60 µl -20°C
Index 503 Primer for Illumina® 1 x 60 µl -20°C
Index 504 Primer for Illumina® 1 x 60 µl -20°C
Index 505 Primer for Illumina® 1 x 60 µl -20°C
Index 506 Primer for Illumina® 1 x 60 µl -20°C
Index 507 Primer for Illumina® 1 x 60 µl -20°C
Index 508 Primer for Illumina® 1 x 60 µl -20°C
Index 701 Primer for Illumina® 1 x 40 µl -20°C
Index 702 Primer for Illumina® 1 x 40 µl -20°C
Index 703 Primer for Illumina® 1 x 40 µl -20°C
Index 704 Primer for Illumina® 1 x 40 µl -20°C
Index 705 Primer for Illumina® 1 x 40 µl -20°C
Index 706 Primer for Illumina® 1 x 40 µl -20°C
Index 707 Primer for Illumina® 1 x 40 µl -20°C
Index 708 Primer for Illumina® 1 x 40 µl -20°C
Index 709 Primer for Illumina® 1 x 40 µl -20°C
Index 710 Primer for Illumina® 1 x 40 µl -20°C
Index 711 Primer for Illumina® 1 x 40 µl -20°C
Index 712 Primer for Illumina® 1 x 40 µl -20°C

Next generation sequencing (NG-seq) is a high throughput method that can be used downstream of chromatin immunoprecipitation (ChIP) assays to identify and quantify target DNA enrichment across the entire genome. SimpleChIP® ChIP-seq Multiplex Oligos for Illumina® (Dual Index Primers) contains adaptors and primers that are ideally suited for multiplex sample preparation for NG-seq on the Illumina® platform. This kit can be used to generate up to 96 distinct, barcoded ChIP-seq DNA libraries that can be combined into a single sequencing reaction. This product provides enough reagents to support up to 96 DNA sequencing libraries, and must be used in combination with SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795.

This product is compatible with SimpleChIP® Enzymatic ChIP Kit (Magnetic Beads) #9003, SimpleChIP® Plus Enzymatic ChIP Kit (Magnetic Beads) #9005, and SimpleChIP® Plus Sonication ChIP kit #56383. This product is not compatible with SimpleChIP® Enzymatic Chromatin IP Kit (Agarose Beads) #9002 and SimpleChIP® Plus Enzymatic Chromatin IP Kit (Agarose Beads) #9004 because agarose beads are blocked with sonicated salmon sperm DNA, which will contaminate DNA library preps and NG-seq.

This kit has been validated in combination with SimpleChIP® ChIP-seq DNA Library Prep Kit for Illumina® #56795 to generate qualified DNA libraries using 50 ng, 5 ng, or 0.5 ng ChIP DNA as starting materials. Libraries prepared from different starting amounts of ChIP DNA exhibit similar Bioanalyzer® profiles, genome mapping rates, numbers of identified binding peak, and signal-to-noise ratios across the whole genome.

Species Reactivity:

All Species Expected

The chromatin immunoprecipitation (ChIP) assay is a powerful and versatile technique used for probing protein-DNA interactions within the natural chromatin context of the cell (1,2). This assay can be used to identify multiple proteins associated with a specific region of the genome, or the opposite, to identify the many regions of the genome bound by a particular protein (3-6). It can be used to determine the specific order of recruitment of various proteins to a gene promoter or to "measure" the relative amount of a particular histone modification across an entire gene locus (3,4). In addition to histone proteins, the ChIP assay can be used to analyze binding of transcription factors and co-factors, DNA replication factors and DNA repair proteins. When performing the ChIP assay, cells or tissues are first fixed with formaldehyde, a reversible protein-DNA cross-linking agent that "preserves" the protein-DNA interactions occurring in the cell (1,2). Cells are lysed and chromatin is harvested and fragmented using either sonication or enzymatic digestion. The chromatin is then immunoprecipitated with antibodies specific to a particular protein or histone modification. Any DNA sequences that are associated with the protein or histone modification of interest will co-precipitate as part of the cross-linked chromatin complex and the relative amount of that DNA sequence will be enriched by the immunoselection process. After immunoprecipitation, the protein-DNA cross-links are reversed and the DNA is purified. Standard PCR or Quantitative Real-Time PCR can be used to measure the amount of enrichment of a particular DNA sequence by a protein-specific immunoprecipitation (1,2). Alternatively, the ChIP assay can be combined with genomic tiling micro-array (ChIP on chip) techniques, high throughput sequencing, or cloning strategies, all of which allow for genome-wide analysis of protein-DNA interactions and histone modifications (5-8).

  1. Orlando, V. (2000) Trends Biochem Sci 25, 99-104.
  2. Kuo, M.H. and Allis, C.D. (1999) Methods 19, 425-33.
  3. Agalioti, T. et al. (2000) Cell 103, 667-78.
  4. Soutoglou, E. and Talianidis, I. (2002) Science 295, 1901-4.
  5. Mikkelsen, T.S. et al. (2007) Nature 448, 553-60.
  6. Lee, T.I. et al. (2006) Cell 125, 301-13.
  7. Weinmann, A.S. and Farnham, P.J. (2002) Methods 26, 37-47.
  8. Wells, J. and Farnham, P.J. (2002) Methods 26, 48-56.
For Research Use Only. Not For Use In Diagnostic Procedures.

Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
SimpleChIP is a registered trademark of Cell Signaling Technology, Inc.
AMPure is a registered trademark of Beckman Coulter, Inc.
Bioanalyzer is a registered trademark of Agilent Technologies, Inc
Illumina is a registered trademark of Illumina, Inc.
Q5 is a registered trademark of New England Biolabs, Inc.
SPRIselect is a registered trademark of Beckman Coulter, Inc.
USER Enzyme is a registered trademark of New England Biolabs, Inc.

News from the Bench

Discover what’s going on at CST, receive our latest application notes and tips, read our science features, and learn about our products.

Subscribe