News from the Bench
Discover what’s going on at CST, receive our latest application notes and tips, read our science features, and learn about our products.
To Purchase # 8726S
|8726S||400 µl (40 immunoprecipitations)||$124.00.0|
Find answers on our FAQs page.
- Additional protein information
- Analytical tools
Rabbit (DA1E) mAb IgG XP® Isotype Control (Magnetic Bead Conjugate) #8726
Immunoprecipitation of HeLa cell lysates using EGF Receptor (D38B1) XP® Rabbit mAb (Magnetic Bead Conjugate) #6937 (lane 1) and Rabbit (DA1E) mAb IgG XP® Isotype Control (Magnetic Bead Conjugate) (lane 2). The western blot was probed using EGF Receptor (D38B1) XP® Rabbit mAb #4267.Learn more about how we get our images
Gallery: Rabbit (DA1E) mAb IgG XP® Isotype Control (Magnetic Bead Conjugate) #8726
Immunoprecipitation for Analysis by Western Blotting
This protocol is intended for immunoprecipitation of native proteins for analysis by western immunoblot or kinase activity.
A. Solutions and Reagents
NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalently purified water.
- 20X Phosphate Buffered Saline (PBS): (#9808).
10X Cell Lysis Buffer: (#9803) 20 mM Tris (pH 7.5), 150 mM NaCl, 1 mM EDTA, 1 mM EGTA, 1% Triton X-100, 2.5 mM Sodium pyrophosphate, 1 mM β-glycerophosphate, 1 mM Na3VO4, 1 μg/ml Leupeptin
NOTE: CST recommends adding 1 mM PMSF (#8553) before use*.
- 3X SDS Sample Buffer: (#7722) 187.5 mM Tris-HCl (pH 6.8 at 25°C), 6% w/v SDS, 30% glycerol, 150 mM DTT, 0.03% w/v bromophenol blue
- 6-Tube Magnetic Separation Rack: (#7017).
- 10X Kinase Buffer (for kinase assays): (#9802) To Prepare 1 ml of 1X kinase buffer, add 100 µl 10X kinase buffer to 900 µl dH2O, mix.
- ATP (10 mM) (for kinase assays): (#9804) To prepare 0.5 ml of ATP (200 µM), add 10 µl ATP (10 mM) to 490 µl 1X kinase buffer.
B. Preparing Cell Lysates
- Aspirate media. Treat cells by adding fresh media containing regulator for desired time.
- To harvest cells under nondenaturing conditions, remove media and rinse cells once with ice-cold PBS.
- Remove PBS and add 0.5 ml 1X ice-cold cell lysis buffer to each plate (10 cm) and incubate the plates on ice for 5 minutes.
- Scrape cells off the plates and transfer to microcentrifuge tubes. Keep on ice.
- Sonicate samples on ice three times for 5 seconds each.
- Microcentrifuge for 10 minutes at 4°C, 14,000 x g, and transfer the supernatant to a new tube. If necessary, lysate can be stored at –80°C.
- Take 200 μl cell lysate and add 10 µl of the immobilized antibody, incubate with rotation overnight at 4°C.
- Wash pellet by using magnetic rack to pellet beads, then discard supernatant once completely clear and add 500 µl of 1X cell lysis buffer, vortex to resuspend and wash the beads, repeat 4 more times for a total of 5 washes.
- Proceed to sample analysis by western blotting or kinase activity (section D).
D. Sample Analysis
Proceed to one of the following specific set of steps.
For Analysis by Western Immunoblotting
- Resuspend the pellet with 20 µl 3X SDS sample buffer. Vortex, then microcentrifuge for 30 sec at 14,000 x g.
- Heat the sample to 95–100°C for 2-5 min and microcentrifuge for 1 min at 14,000 x g.
- Load the sample (15–30 µl) on a 4–20% gel for SDS-PAGE.
- Analyze sample by western blot (see Western Immunoblotting Protocol).
NOTE: To minimize masking caused by denatured IgG heavy chains (~50 kDa), we recommend using Mouse Anti-Rabbit IgG (Light-Chain Specific) (L57A3) mAb (#3677) or Mouse Anti-Rabbit IgG (Conformation Specific) (L27A9) mAb (#3678) (or HRP conjugate #5127). To minimize masking caused by denatured IgG light chains (~25 kDa), we recommend using Mouse Anti-Rabbit IgG (Conformation Specific) (L27A9) mAb (#3678) (or HRP conjugate #5127).
For Analysis by Kinase Assay
- Wash pellet by using magnetic rack to pellet beads, then discard supernatant once completely clear and add 500 Âµl of 1X kinase buffer, vortex to resuspend and wash the beads, repeat 1 more time for a total of 2 washes. Keep on ice during washes.
- Suspend pellet in 40 µl 1X kinase buffer supplemented with 200 µM ATP and appropriate substrate.
- Incubate for 30 min at 30°C.
- Terminate reaction with 20 µl 3X SDS sample buffer. Vortex, then microcentrifuge for 30 sec.
- Transfer supernatant containing phosphorylated substrate to another tube.
- Heat the sample to 95–100°C for 2–5 min and microcentrifuge for 1 min at 14,000 x g.
- Load the sample (15–30 µl) on SDS-PAGE (4–20%).
posted December 2007
Directions for Use: Add 10 μl of well-vortexed beads to 200 μl of cell lysate at 1 mg/ml in 1X Cell Lysis Buffer (10X) #9803. See protocol for more details.
For bead washing and subsequent elution of immunocomplexes, the beads can be separated from solution using our 6-Tube Magnetic Separation Rack #7017. Place the tubes containing the beads in the Magnetic Separation Rack and wait 1 to 2 minutes for the solution to clear before carefully removing the supernatant. Remove the tubes from the Magnetic Separation Rack, add new solution and resuspend the beads by gently vortexing or rocking the tube.
Rabbit (DA1E) mAb IgG XP® Isotype Control (Magnetic Bead Conjugate) is not directed against any known antigen. It functions as an isotype control for rabbit IgG monoclonal antibodies.
This Cell Signaling Technology (CST) antibody is immobilized by the covalent reaction of hydrazinonicotinamide-modifed antibody with formylbenzamide-modified magnetic bead. Rabbit (DA1E) mAb IgG XP® Isotype Control (Magnetic Bead Conjugate) is useful to determine non-specific immunoprecipitation complexes.
Isotype control antibodies are used to estimate the nonspecific binding of target primary antibodies due to Fc receptor binding or other protein-protein interactions. An isotype control antibody should have the same immunoglobulin type and be used at the same concentration as the test antibody.
For Research Use Only. Not For Use In Diagnostic Procedures. Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc. XP is a registered trademark of Cell Signaling Technology, Inc.