Upstream / Downstream
Explore pathways related to this product.
Research More. Spend Less.
Spend $650 or more and get 20% off*
(*Offer valid in the US only. Expires June 30, 2017)
To Purchase # 1052S
Find answers on our FAQs page.
- Additional protein information
- Analytical tools
Phospho-4E-BP1 (Thr37/46) Blocking Peptide #1052
Gallery: Phospho-4E-BP1 (Thr37/46) Blocking Peptide #1052
A. Solutions and Reagents
NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.
- Ethanol, anhydrous denatured, histological grade (100% and 95%).
- Deionized water (dH2O).
- Hematoxylin (optional).
- Wash Buffer:
- 1X Tris Buffered Saline with Tween® 20 (TBST): To prepare 1L 1X TBST add 100 ml 10X Tris Buffered Saline with Tween® 20 (#9997) to 900 ml dH20, mix.
- SignalStain® Antibody Diluent (#8112).
- 1X Citrate Unmasking Solution: To prepare 250 mL of 1X citrate unmasking solution, dilute 25 ml of SignalStain® Citrate Unmasking Solution (10X) (#14746) with 225 mL of dH2O.
- 3% Hydrogen Peroxide: To prepare 100 ml, add 10 ml 30% H2O2 to 90 ml dH2O.
- Blocking Solution: TBST/5% Normal Goat Serum or 1X Animal-Free Blocking Solution.
- Detection System: SignalStain® Boost IHC Detection Reagents (HRP, Rabbit #8114).
- Substrate: SignalStain® DAB Substrate Kit (#8059).
- Hematoxylin: Hematoxylin (#14166).
- Mounting Medium: SignalStain® Mounting Medium (#14177).
NOTE: Do not allow slides to dry at any time during this procedure.
- Deparaffinize/hydrate sections:
- Incubate sections in three washes of xylene for 5 min each.
- Incubate sections in two washes of 100% ethanol for 10 min each.
- Incubate sections in two washes of 95% ethanol for 10 min each.
- Wash sections two times in dH2O for 5 min each.
C. Antigen Unmasking
For Citrate: Heat slides in a microwave submersed in 1X citrate unmasking solution until boiling is initiated; follow with 10 min at a sub-boiling temperature (95°-98°C). Cool slides on bench top for 30 min.
- Wash sections in dH2O three times for 5 min each.
- Incubate sections in 3% hydrogen peroxide for 10 min.
- Wash sections in dH2O two times for 5 min each.
- Wash sections in wash buffer for 5 min.
- Block each section with 100–400 µl of preferred blocking solution for 1 hr at room temperature.
- Remove blocking solution and add 100–400 µl primary antibody diluted in SignalStain® Antibody Diluent (#8112) to each section. Incubate overnight at 4°C.
- Equilibrate SignalStain® Boost Detection Reagent (HRP, Rabbit #8114) to room temperature.
- Remove antibody solution and wash sections with wash buffer three times for 5 min each.
- Cover section with 1–3 drops SignalStain® Boost Detection Reagent (HRP, Rabbit #8114) as needed. Incubate in a humidified chamber for 30 min at room temperature.
- Wash sections three times with wash buffer for 5 min each.
- Add 1 drop (30 µl) SignalStain® DAB Chromogen Concentrate to 1 ml SignalStain® DAB Diluent and mix well before use.
- Apply 100–400 µl SignalStain® DAB to each section and monitor closely. 1–10 min generally provides an acceptable staining intensity.
- Immerse slides in dH2O.
- If desired, counterstain sections with hematoxylin (#14166).
- Wash sections in dH2O two times for 5 min each.
- Dehydrate sections:
- Incubate sections in 95% ethanol two times for 10 sec each.
- Repeat in 100% ethanol, incubating sections two times for 10 sec each.
- Repeat in xylene, incubating sections two times for 10 sec each.
- Mount sections with coverslips and mounting medium (#14177).
posted February 2010
revised March 2016
This peptide is used to block Phospho-4E-BP1 (Thr37/46) (236B4) Rabbit mAb #2855 reactivity.
The quality of the peptide was evaluated by reversed-phase HPLC and by mass spectrometry. The peptide blocks Phospho-4E-BP1 (Thr37/46) (236B4) Rabbit mAb #2855 signal in immunohistochemistry and both Phospho-4E-BP1 (Thr37/46) (236B4) Rabbit mAb #2855 and Phospho-4E-BP1 (Thr37/46) Antibody #9459 in Western blotting.
Use as a blocking reagent to evaluate the specificity of antibody reactivity in Western blotting and immunohistochemistry protocols. For immunohistochemistry, add twice the volume of peptide as volume of antibody used in 100 μl total volume. Incubate for a minimum of 30 minutes prior to adding the entire volume to the slide. For Western blotting, add an equal volume of peptide as volume of antibody used in 10 ml total volume, and incubate at room temperature for 30 minutes before allowing to react with the blot. Recommended antibody dilutions can be found on the product data sheet.Storage: Supplied in 20 mM potassium phosphate (pH 7.0), 50 mM NaCl, 0.1 mM EDTA, 1 mg/ml BSA, 5% glycerol and 1% DMSO. Store at –20°C.
Translation repressor protein 4E-BP1 (also known as PHAS-1) inhibits cap-dependent translation by binding to the translation initiation factor eIF4E. Hyperphosphorylation of 4E-BP1 disrupts this interaction and results in activation of cap-dependent translation (1). Both the PI3 kinase/Akt pathway and FRAP/mTOR kinase regulate 4E-BP1 activity (2,3). Multiple 4E-BP1 residues are phosphorylated in vivo (4). While phosphorylation by FRAP/mTOR at Thr37 and Thr46 does not prevent the binding of 4E-BP1 to eIF4E, it is thought to prime 4E-BP1 for subsequent phosphorylation at Ser65 and Thr70 (5).
For Research Use Only. Not For Use In Diagnostic Procedures. Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.