View Featured Offers >>
SignalStain® Mounting Prep Solution
Buffers & Dyes

SignalStain® Mounting Prep Solution #50815

Citations (0)

Product Usage Information

1. After counterstaining, rinse the slide with water.

2. Place the slide at an angle on a few paper towels to allow excess fluid to run off the slide.

3. Place the slide on a flat surface and pipette or add a few drops of SignalStain® Mounting Prep Solution onto the tissue, covering it completely.

4. Allow the slide to soak. Generally, 5 minutes is sufficient to yield an optimal signal intensity.

5. Place the slide at an angle on a few paper towels to drain off the excess fluid from the slide.

6. Let the solution dry completely for a minimum of 20 minutes, or longer if needed. The slide must be completely dry before proceeding. No further washing is necessary.

7. Mount coverslips on the slide using any mounting method.


Store at room temperature. Solution is stable for 12 months.

Product Description

SignalStain® Mounting Prep Solution is a preservation solution that acts as a sealant on tissue sections. When using this solution on a stained tissue section, specimens can be permanently mounted on the slides without chromogens fading over time. The benefits of using SignalStain® Mounting Prep Solution include saving time while mounting slides, avoiding usage of toxic chemicals, and eliminating hazardous waste accumulation. This solution is created for tissue specimens that are stained with peroxidase or alkaline phosphatase compatible chromogens. It enables chromogens that may be incompatible with ethanol or xylene to be used with non-aqueous, permanent mounting media.

Limited Uses

Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.

Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.

For Research Use Only. Not for Use in Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
SignalStain is a registered trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit our Trademark Information page.
To Purchase # 50815
Cat. # Size Qty. Price
30 ml