View Featured Offers >>
Cyclic AMP XP® Assay Kit
Cellular Assay Kits
Assay Kit

Cyclic AMP XP® Assay Kit #4339

Citations (1)
Figure 1: cAMP Standard was diluted in 1X Cell Lysis Buffer #9803 and samples were assayed following the Cyclic AMP XP® Assay Kit protocol. This standard curve is for demonstration purposes only; users should generate a standard curve for each sample set in order to accurately determine cAMP concentration.
Figure 2: Treatment of CHO cells with Forskolin #3828 increases cAMP concentration as detected by Cyclic AMP XP® Assay Kit #4339. CHO cells were seeded at 4x104 cells/well in a 96-well plate and incubated overnight. Cells were either left untreated or pretreated with 0.5 mM IBMX for 30 minutes prior to forskolin treatment (15 minutes) and lysed with 1X Cell Lysis Buffer #9803. The absorbance values (left) and percentage of activity (right) are shown above. The percentage of activity is calculated as follows: % activity=100x[(A-Abasal)/(Amax-Abasal)], where A is the sample absorbance, Amax is the absorbance at maximum stimulation (i.e., high forskolin concentration), and Abasal is the absorbance at basal level (no forskolin). Forskolin directly activates adenylyl cyclases and increases cellular cAMP concentration. IBMX is a non-specific inhibitor of cAMP and cGMP phosphodiesterases and promotes accumulation of cAMP and cGMP in cells.
Figure 3: Treatment of 293 cells with isoproterenol increases the cAMP concentration as detected by Cyclic AMP XP® Assay Kit #4339. 293 cells were seeded at 3x104 cells/well in a 96-well plate and incubated overnight. Cells were pretreated with 0.5 mM IBMX for 30 minutes prior to isoproterenol treatment (3 minutes) and lysed with 1X Cell Lysis Buffer #9803. The absorbance values (left) and percentage of activity (right) are shown above. The percentage of activity is calculated as follow: % activity=100*[(A-Abasal)/(Amax-Abasal)], where A is the absorbance of the sample, Amax is the absorbance at maximum stimulation (i.e., high isoproterenol concentration), and Abasal is the absorbance at basal level (no isoproterenol). Isopropterenol is a β-adrenoceptor agonist and activates beta-2 adrenergic receptors (ADRB2) that are endogenously expressed on 293 cells. Activation of ADRB2 then leads to activation of adenylyl cyclase and synthesis of cAMP as its second messenger.
To Purchase # 4339
Cat. # Size Qty. Price
1 Kit  (96 assays)

Product Includes Quantity (with Count) Solution Color
cAMP Rabbit mAb Coated Microwells 1 x 96 tests
cAMP-HRP Conjugate 1 x 11 ml Red
cAMP Standard (2.4 uM) 1 x 1 ml
TMB Substrate 7004 1 x 11 ml
STOP Solution 7002 1 x 11 ml
Sealing Tape 1 x 2 ea
ELISA Wash Buffer (20X) 9801 1 x 10 ml
Cell Lysis Buffer (10X) 9803 1 x 15 ml



View >Collapse >

Enzyme Immuno Assay Protocol

A. Reagent Preparation

  1. Bring all microwell strips to room temperature before use.
  2. Prepare 1X Wash Buffer by diluting 20X Wash Buffer (included in each kit) in Milli-Q or equivalently purified water.
  3. Dilute the 10X Cell Lysis Buffer #9803 to 1X in Milli-Q or equivalently purified water. 1 mM phenylmethylsulfonyl fluoride (PMSF) should be added fresh each time. This buffer can be stored at 4°C for short-term use (1–2 weeks).

B. Cell Lysate Preparation

NOTE: This procedure is for a 96-well tissue culture plate. It can be modified for other tissue culture plates (6, 12, 24, or 48 well).

  1. Plate cells of interest in 96-well plate (typically between 6–100 X 103 cells/well) and incubate overnight under appropriate cell culture conditions.
  2. Rinse cells with 200 μl warm PBS, then add test compounds in serum free mediums and incubate cells for the desired time period.
  3. Rinse cells twice with 200 µl ice cold PBS, and then add 100 μl/well 1X lysis buffer, keep cells on ice for 5 to 10 minutes.

NOTE: If cell debris is observed it can be removed by brief centrifugation of the plate and transfer of the clear lysates to a new 96 well plate.

C. Assay

  1. Bring all kit components to room temperature.
  2. Add 50 µl of the HRP-linked target solution and 50 μl sample to the antibody-coated assay plate. Cover the plate and incubate at room temperature for 3 hours on a horizontal orbital plate shaker.
  3. Discard plate contents and wash wells 4 times with 200 μl /well of 1X Wash Buffer. Make sure to discard all liquid after each wash but do not allow wells to completely dry.
  4. Add 100 μl TMB substrate.
  5. Incubate for 30 minutes at room temperature.

NOTE: Watch the color as it being developed since it may be necessary to stop the reaction before 30 minutes.

  1. Add 100 μl STOP solution.
  2. Measure absorbance at 450 nm (for optimal results, read the plate within 30 minutes after adding STOP solution).

NOTE: To determine the absolute amount of the tested substance, a standard curve needs to be generated each time. Please follow the detailed protocol on the product datasheet to determine the concentration range for the standard curve.

posted April 2010

Protocol Id: 68

Product Description

The Cyclic AMP XP® Assay Kit is a competition enzyme-linked immunoassay used to determine cAMP levels in cells or tissues of interest. In this assay, cAMP found in test sample competes with a fixed amount of HRP-linked cAMP for binding to an anti-cAMP XP® Rabbit mAb immobilized onto a 96-well plate. Following washing to remove excess sample cAMP and HRP-linked cAMP, HRP substrate TMB is added to develop color. Because of the competitive nature of this assay, the magnitude of the absorbance for this developed color is inversely proportional to the quantity of sample cAMP. Measurement of absorbance using the cAMP Standard allows calculating the absolute amount of cAMP in a sample of interest.
Note: 12, 8-well modules -Each module is designed to break apart for 8 tests.

Specificity / Sensitivity

The immunoreactivity of this kit was tested against the following: ADP, AMP, ATP, cAMP, cGMP, cIMP, cTMP, CTP, GDP, GMP and GTP. Relatively minor cross-reactivity was observed with cGMP and cIMP, with 10 fold higher sensitivity for cAMP compared to either cGMP or cIMP. No cross-reactivity was observed with any of the other factors tested. Kit sensitivity, as shown in Figure 1, demonstrates a dynamic range of 0.2 to 12 nM of cAMP. Changes in cellular cAMP levels following specific treatments are shown in Figure 2 (CHO cells) and Figure 3 (293 cells).

Species Reactivity:

All Species Expected


Cyclic adenosine 3’,5’-monophosphate (cAMP) is an important second messenger involved in many signal transduction pathways in different cell types of numerous species (1-3). In mammalian cells this important molecule is produced by adenylyl cyclases (AC). Extracellular stimuli such as neurotransmitters, hormones, chemokines, lipid mediators and drugs, can modulate AC activity to increase or decrease cAMP production by binding to a large number of transmembrane G protein-coupled receptors (4). The degradation of cAMP to AMP is catalyzed by phosphodiesterases that are regulated by intracellular nucleotide concentrations, phosphorylation, or binding of Ca2+/calmodulin and other regulatory proteins (5). A set of diverse molecules, including cAMP-dependent protein kinase (PKA), cyclic nucleotide-gated ion channels, and exchange proteins that are activated by cAMP (Epac), mediate downstream cAMP signaling (6,7). cAMP modulates various biological processes including metabolism, differentiation, cardiac cell functions, neuronal signaling, cell adhesion, and immune functions (5-7).

Limited Uses

Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.

Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.

For Research Use Only. Not for Use in Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
XP is a registered trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit our Trademark Information page.